Understand how to assemble your own strip built kayak
Posted by evanbeasley | Posted in Uncategorized | Posted on 17-03-2010-05-2008
0
An excellent system of constructing your own kayak is that of strip building. Although it does take quite some time to make one, its quite a straight forward process, prividing you have proper plans.
The boat is built from narrow pieces of lumber. The wood could be gotten pre-sawn, or cut off a plank by a power electric saw. The width of the timber will be just about half a centimeter and as long as the craft. If you are planning to build a very large sea kayak, making joins in the strips is permissible. These strips should be attached to the forms with staples and adhesive. After the adhesive has cured, the staples and the forms must be taken away then both sides are sanded to a good finish. Due to the fact that wood soaks up moisture, the whole structure must be covered in a coating of fibreglass and epoxyresin. Doing this means that the craft is watertight and makes it much more robust than it would be without this technique.
Then your kayak just wants the finishing stages such as hatches and cockpit coaming then your kayak is complete. Learn more on this site